How to Use Permatex Windshield Repair Kit: A Step-by-Step Guide
Are you tired of dealing with pesky windshield chips and cracks? Look no further than the Permatex Windshield Repair Kit. This DIY solution is designed to help you fix minor windshield damage quickly and easily. In this article, we’ll show you how to use Permatex Windshield Repair Kit to get your windshield looking like new again.
What’s Included in the Permatex Windshield Repair Kit
Before we dive into the instructions, let’s take a look at what’s included in the Permatex Windshield Repair Kit. The kit typically includes:
- 1 oz of windshield repair resin
- 1/4 oz of activator
- 1 repair film
- 1 placard
- 1 mixing stick
- 1 scraping card
- Instructions
Preparation is Key
Before you start the repair process, make sure you have a clean and dry workspace. Remove any debris or dirt from the chipped area using a cloth and some water. Next, clean the area with a lint-free cloth and some glass cleaner. This will ensure that the repair resin adheres properly to the glass.
Step 1: Prepare the Repair Area
Now that the area is clean, it’s time to prepare it for the repair. Use the scraping card to remove any loose debris from the chipped area. Then, use the mixing stick to apply a small amount of activator to the chip. This will help the repair resin flow more easily into the chip.
How to Use Permatex Windshield Repair Kit: Applying the Resin
With the repair area prepared, it’s time to apply the repair resin. Follow these steps:
Step 2: Mix the Resin and Activator
Use the mixing stick to mix the repair resin and activator together. Make sure to mix it in a well-ventilated area and avoid breathing in the fumes.
Step 3: Apply the Resin
Use the mixing stick to apply a small amount of the resin mixture to the chipped area. Make sure to fill the chip completely, but don’t overfill it.
Step 4: Apply the Repair Film
Use the repair film to cover the chipped area. Press down firmly on the film to ensure it adheres to the glass.
Step 5: Allow the Resin to Cure
Let the resin cure for the recommended amount of time, usually 10-15 minutes, depending on the temperature and humidity.
How to Use Permatex Windshield Repair Kit: Finishing Touches
Once the resin has cured, it’s time to remove the repair film and inspect the repair. If there are any air bubbles or imperfections, you can use a small pin to pop the bubbles or apply some additional resin to fill in any gaps.
Step 6: Remove the Repair Film
Use a pair of scissors or a utility knife to carefully cut around the repair film. Then, gently peel off the film to reveal the repaired area.
Step 7: Inspect and Touch Up
Inspect the repair to make sure it’s smooth and even. If necessary, apply some additional resin to fill in any gaps or imperfections.
Common Mistakes to Avoid
When using the Permatex Windshield Repair Kit, there are a few common mistakes to avoid. These include:
- Not preparing the repair area properly
- Not mixing the resin and activator correctly
- Overfilling the chip with resin
- Not allowing the resin to cure for the recommended amount of time
Tips and Tricks
Here are a few tips and tricks to keep in mind when using the Permatex Windshield Repair Kit:
- Make sure the repair area is clean and dry before applying the resin
- Use a small amount of resin to avoid overfilling the chip
- Apply the repair film carefully to avoid air bubbles
- Allow the resin to cure for the recommended amount of time for best results
How to Use Permatex Windshield Repair Kit: Conclusion
How to use Permatex Windshield Repair Kit is a simple process that can save you time and money by avoiding costly windshield repairs. By following the steps outlined in this article, you can fix minor windshield damage quickly and easily. Remember to prepare the repair area, mix the resin and activator correctly, and allow the resin to cure for the recommended amount of time for best results.